Chat with us, powered by LiveChat

Rādīt preces pēc: 10
20
50 100
Nosaukums Nom Nr. Cena
(€ )
Daudzums
KIT5605
Korpuss micro:bit mikrodatoram ar stiprināšanu pie plates   KIT5605 3.50 €
4.10 €

gab.

Keep your BBC micro:bit safe by using this mountable version of the MI:pro Protector Case for the BBC micro:bit. This case has been specifically designed with portability and expansion in mind.

This 'Mountable' case features two 'keyhole slot' style wall mounting points attached to the sides of the BBC micro:bit case.

The clear casing allows the BBC micro:bit be seen inside the case, allowing the on-board LED matrix to be viewed. This case is easy to assemble using the nylon screws provided.

Note:

  • This case requires assembly.
  • This version does not allow the 2 x AAA battery pack to be bolted on to the back as it is designed to fit tight against the mounting surface.

Features:

  • Ideal for use in USB powered applications.
  • Provides direct access to A and B buttons.
  • Provides direct access to the micro USB connection and reset button on the back of the BBC micro:bit.
  • Provides excellent protection for the BBC micro:bit while allowing access to the bottom pins.
  • Clear case material shows the on-board LEDs in perfect clarity.

Contents:

  • 4 x M3 Cheese Head Nylon Machine Screw.
  • 4 x M3 Nylon Full Nut.
  • 1 x Back Mounting Plate.
  • 1 x Front Plate.
  • 2 x Mid-layer Plate.

Dimensions:

  • Length: 93mm.
  • Width: 37mm.
  • Height: 27mm.

Video:

 

Requires:

  • 1 x BBC micro:bit.
  • 1 x Flat-head Screwdriver.
  • 2 x M3 Mounting Screw.
  • 1 x Micro USB Cable.
KIT5623
Servo motora kontrolieris micro:bit mikrodatoram ar 3xAAA bateriju ligzdu     KIT5623 14.70 €
gab.

The Servo:Lite board for the BBC micro:bit is a simple board that allows you to easily connect and control low power servo motors (servo's must be capable of operating at 3.3V) using the BBC micro:bit. It is connected to the micro:bit using five bolts. Connect two servos in standard configuration and it can drive up to 3 servos if the addressable ZIP LEDs arent needed.

It is powered by 3 AAA batteries and also supplies power to the BBC micro:bit, the board features an On / off switch so when it's not in use the batteries won't drain.

 

The board also features 5 x RGB individually addressable ZIP LEDs (NeoPixel compatible) and additional external ZIP LEDs can be connected to the board as required.

We've produced a range of tutorials and guides that can be found in the resources section below. We have guides detailing; how to control a third servo and how to write code for the on-board ZIP LEDs.

Features:

  • Connect two servos in standard conguration and can drive up to 3 servos if the addressable ZIP LEDs arent needed.
  • Powered by 3 AAA batteries that also supply power to the BBC microbit (not supplied).
  • On / off switch.
  • 5 x RGB addressable ZIP LEDs (NeoPixel compatible). Additional external ZIP LEDs can be connected to the board.

Contents:

  • 1 x Servo:Lite board with battery holder pre-fitted.
  • 5 x M3x8 Counter sunk Pozi Steel screws.
  • 1 x Perspex spacer.

Dimensions:

  • Length: 55mm.
  • Height: 52mm.
  • Height: 17mm.
KIT5606C
Korpuss mikrodatoram BBC micro:bit     KIT5606C 4.73 €
gab.
  • Aizsargā BBC micro:bit pret fiziskiem defektiem, vienlaicīgi saglabā pieejas pogām un savienojumiem
  • 2xAAA KIT2271 baterijas ligzdas stiprinājuma vieta
  • Brīva pieejam galvenajiem portiem un microUSB savienojumam
  • Caurspīdīgs korpuss laiž cauri gaismu un ir redzamas indikācijas

Komplekts sastāv:

  • 4 x M3 Neilona skrūves
  • 1 x M3 8mm skrūves
  • 5 x M3 Neilona uzsgriežņi
  • 1 x Aizmugurējā plāksne
  • 1 x Priekšējā plāksne
  • 2 x Iekšējās plākses

Izmēri:

  • Garums: 65mm.
  • Platums: 50mm.
  • Augstums: 17mm.

Papildus nepieciešams:

  • 1 x BBC micro:bit.
  • 1 x Plakanais skrūvgriezis
  • 1 x Phillips skrūvgriezis
KIT5601
Savienojums paredzēts mikrodatora BBC micro:bit savienošanai     KIT5601 4.10 €
gab.

Looking to do more with your BBC micro:bit? Unlock its potential with this Edge Connector Breakout Board! This breakout board has been designed to offer an easy way to connect additional circuits and hardware to the pins on the edge of the BBC micro:bit. It provides access to all of the BBC micro:bit processor pins allowing a lot of extra functionality to be added. The datasheet (below) includes a helpful diagram explaining the function of every pin on the BBC micro:bit.

This Edge Connector Breakout Board for the BBC micro:bit gives access to all of the important pins on the bottom edge of the BBC micro:bit. 21 pins are broken out in total; providing additional I/O lines, direct access to buttons A and B, the LED matrix outputs and the I2C bus. Please refer to the datasheet below for more details.

The BBC micro:bit pins are broken out to a row of solderable pads. The SCL and SDA pins are separated at the edge of the board providing easy identification. The PCB includes a prototyping area with 3V, 0V and unconnected rows that can be soldered to. This allows the easy connection of switches, sensors and any pull-up or pull-down resistors etc. as required.

If you are looking for inspiration, look no further than these examples using the Edge Connector for the BBC micro:bit:

  • The breakout board is used in our Collision Detection Buggy that makes use of the extra I/O available.
  • We've also used this Edge Connector for the BBC micro:bit in our Inventor's Kit for the BBC micro:bit to make connecting up these experiments a breeze.
KIT5611C
Korpuss (caurspīdīgs) mikrodatoram BBC micro:bit     KIT5611C 5.15 €
gab.
Korpuss (caurspīdīgs) mikro kompjūteram BBC micro:bit, kopā ar korpusu barošanas modulim KIT5610 (pērkams atsevišķi)
Micro-bit
Mikrodators micro:bit BBC     Micro-bit 23.10 €
gab.
Mikrodators ar 32 bitu ARM Cortex-M0 procesoru, Bluetooth 4.0 BLE, kompasu un akselerometra moduli, 25 LED matrica, 21 pin savienotāju
KIT5609
Montāžas panelis ar savienojumiem mikrodatoram micro:bit     KIT5609 13.55 €
gab.

Montāžas plates komplekts palīdz izveidot dažādus projektus mikrodatoru BBC micro:bit bez lodēšanas.

Komplektā ietilpst:

  • 4 x M3 skrūves.
  • 1 x Mazā montāžas plate.
  • 10 x Savienojuma vadi spraudnis - spraudnis.
  • 10 x Savienojums vadi ligzda - ligzda.
  • 1 x Lielā montāžas plate.
  • 1 x BBC micro:bit mikrodatora savienojums.
  • 4 x abpusējās līmlentes posmi.
KIT5610
Rezerves barošanas modulis ar bateriju CR2032 paredzēts BBC micro:bit     KIT5610 6.83 €
gab.
Modulis ar CR2032 baterijas ligzdu, paredzēts mikrodatora BBC Micro: Bit barošanai, tas ir saistīts tieši ar mikrodatoru, modulim ir iebūvēts slēdzis un skaņas signāls
KIT5611G
Korpuss (zaļš) mikrodatoram BBC micro:bit     KIT5611G 5.15 €
gab.
Korpuss (zaļš) mikrodatoram BBC micro:bit; lietošanai ar rezerves barošanas moduli KIT5610 (nopērkams atsevišķi)
KIT5611B
Korpuss (zils) mikrodatoram BBC micro:bit     KIT5611B 5.15 €
gab.
Korpuss (zils) mikrodatoram BBC micro:bit; lietošanai ar rezerves barošanas moduli KIT5610 (nopērkams atsevišķi)
EF03404
Jungtis paprastam BBC micro:bit jungimui su eksperimentine plokšte (breadboard)     EF03404 6.83 €
gab.

Micro:bit Breadboard Adapter is a breadboard pinboard based on Micro:bit. It can be directly plugged into breadboard. Through this adapter, you can start various DIY creation on Mico:bit Breadboard.

Features:

1. Fully compatible with Micro:bit board;

 2. All Micro:bit connect ports can be corresponded to the ports on pinboard.

KIT5603
Piederumu komplekts micro:bit mikrodatoram     KIT5603 30.45 €
gab.

The Inventor's Kit for the BBC micro:bit is a great way to get started with programming and hardware interaction with the BBC micro:bit. This Inventor's Kit contains everything you need to complete 10 experiments including using LEDs, motors, LDRs and capacitors.

To get you off to a flying start, are included an easy to follow tutorial book which guides you through everything you will need to know about programming the BBC micro:bit. You don't need any experience with programming as the tutorial book will guide you every step of the way. You'll be programming and creating circuits in no time!

The Kitronik Inventor's Kit for the BBC micro:bit provides a fantastic way of learning how to construct and control electronic circuits. The BBC micro:bit has a selection of pins that are located on the bottom edge of its PCB (see datasheet below for details). By using our specially designed Edge Connector Board for the BBC micro:bit in conjunction with the breadboard (see below), it is easy to use these pins to connect additional components to the BBC micro:bit.

No soldering is required and you can build your first circuit in minutes!

Note:

  • This kit requires assembly.

Features:

  • No soldering required - build your first circuit in minutes!
  • Make 10 experiments included in the provided step-by-step tutorial book.
  • All parts are included to conduct the 10 experiments (listed below).
  • Breaks out 21 accessible pins from the BBC micro:bit using the Edge Connector Board for the BBC micro:bit (included).
  • Small Prototype Breadboard included for fast prototyping.

Contents:

  • 1 x Perspex Mounting Plate.
  • 1 x Potentiometer & Finger Adjust Spindle.
  • 2 x Plastic Spacer 10mm.
  • 1 x Sticky Fixer for Battery Pack.
  • 1 x Small Prototype Breadboard.
  • 1 x Terminal Connector.
  • 4 x Push Switch.
  • 1 x Motor.
  • 1 x BC337 NPN Transistor.
  • 2 x Red 5mm Diffused LED - 275mCd.
  • 2 x Orange 5mm Diffused LED - 275mCd.
  • 2 x Yellow 5mm Diffused LED - 125mCd.
  • 2 x Green 5mm Diffused LED - 35mCdGreen 5mm LED.
  • 1 x RGB 5mm Water Clear LED - 45deg - 2100mCd - Cmn Cathode.
  • 1 x Fan Blade.
  • 5 x 2.2KΩ Resistor.
  • 5 x 10KΩ Resistor.
  • 5 x 47Ω Resistor.
  • 1 x Edge Connector Breakout Board for BBC micro:bit.
  • 1 x Miniature LDR.
  • 10 x Male to Male Jumper Wires.
  • 10 x Male to Female Jumper Wires.
  • 4 x Self-adhesive Rubber Feet.
  • 1 x 470uF Electrolytic Capacitor.
  • 1 x Piezo Element Buzzer.
  • 4 x Pan Head M3 Machine Screw.

Video:

 

Requires:

  • 1 x BBC micro:bit.
  • 1 x Phillips Screwdriver.
  • 1 x Terminal Block Screwdriver.
  • 1 x Micro USB Cable.

All of the experiments included in this booklet (listed below) are based on the Microsoft BlockEditor and Microsoft TouchDevelop editor software. Also produced a MicroPython code example for each of the experiments and Video resources featuring a walk-through and hints and tips to help you complete the experiments.

Inventors Kit Addtional Free Resources:

Exp No#. Experiment Name.
1 Say Hello to the BBC micro:bit.
2 Using an LDR and analog inputs.
3 Dimming an LED using a potentiometer.
4 Using a transistor to drive a motor.
5 Using the accelerometer to control motor speed.
6 Setting the tone with a piezo buzzer.
7 Wind Power.
8 Making a game using the compass.
9 Capacitor charge circuit.
10 Using an RGB LED.
11 Making a pedestrian crossing.
12 Making a random dice.
KIT5624
Robots - Bagijs: MOVE izmantošanai ar BBC micro: bit (nopērkams atsevišķi)     KIT5624 34.65 €
gab.
Komplektā ietilpst 2 servo motori, servomotoru regulators, korpusa daļas; Izglītojošais komplekts, kurš paredzēts lietot ar mikrodatoru micro: bit (nopērkams atsevišķi)
MB158-US
Mikrodatora micro:bit BBC starta komplekts     MB158-US 28.35 €
gab.
VMM001
Startinis BBC micro:bit komplektas su korpusu, baterijų dėklu, baterijomis ir USB kabeliu     VMM001 32.55 €
gab.
VMM003
Jungtis skirta paprastam BBC micro:bit jungimui   VMM003 2.35 €
3.05 €

gab.
Rādīt preces pēc: 10
20
50 100

Kāpēc pirkt online?

Ērta piegāde. Mēs piegādājam preces visā Latvijas teritorijā un ārpus tās ar kurjerdienestu palīdzību. Preces var saņemt arī mūsu veikalā. 

Uzticamība. Esam vieni no lielākajiem elektronikas kompenenšu un rezerves daļu izplatītātjiem Baltijas valstīs. Nodrošinām garantijas saistību izpildi . 

Plaša izvēle. Varat izvēlēties no vairāk kā 13 tūkstošu preču lielā noliktavas sortimenta vai pasūtīt no katalogu vairāk kā 5 miljonu preču lielā klāsta.

Kāpēc iepirkties Lemona veikalos?

Profesionāla apkalpošana. Mūsu speciālisti ne tikai pārdos nepieciešamo preci, bet arī ieteiks labāko risinājumu konkrētajai vajadzībai.

Aptuveni 200 preču piegādātāji. Mēs saņemam preces no visas pasaules. Daudzu gadu laikā mēs esam izvēlējušies kvalitatīvas preces no uzticamiem ražotājiem. 

Palīdzība

Komentāri un ieteikumi