Piegādes termiņi
Piegāde uz norādīto ar adresi ar kurjeru (1-4d.d., ja prece ir noliktavā)
Vairāk par 35,00 € (Pasūtījumi līdz 1000 kilogrami) | Bez maksas |
Līdz 35,00 € (Pasūtījumi līdz 1000 kilogrami) | 3,99 € |
Piegāde uz DPD Paku skapi (1-4d.d., ja prece ir noliktavā)
2,50 €
Preces apraksts
SfAR-S-8AI2DO is designed to be applied wherever multiple sensors are used. Thanks to 2x digital outputs and logic pre-installed in the module, it can not only be used as a PLC I/O extension, but also as a standalone application controller as well.
The module has 8x analog inputs (AI) and 2x digital outputs (DO). Analog inputs can work in 7 modes as voltage or current inputs. Digital outputs are NPN transistor outputs. All inputs and outputs are isolated from the logic with opto-isolators.
A built-in RS485 interface allows easy connection over Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/O, power supply, and RS485 communication.
Configuration of the modules is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without additional power supply.
To simplify installation, the modules have been equipped with the Quick Connector system. Using a dedicated SFAR-S-LINK cable allows for connection of up to 10 modules, which provide both RS485 communication and external power supply.