DALI DT8 4 in 1 LED Controller, push compatible, Sunricher
Delivery terms
Pickup at LEMONA electronics store
Pickup at LEMONA electronics store For free
Quantity in shop
 Not available | Riga Store |
| Not available | Central Warehouse |
Home delivery
Home delivery
After handing the goods to the courier, we will inform you by e-mail.
Over €35.00 (Orders up to 1000 kgs) | For free |
To €35.00 (Orders up to 1000 kgs) | €3.99 |
Delivery to a DPD Pickup location
Delivery to a DPD Pickup location
€2.50
Product description
DALI DT8 4 in 1 LED Controller, push compatible
Features:
• In compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, IEC 62386-209:2011
• Built-in DALI-2 interface, DALI DT8 device
• 4 in 1 DALI DT8 LED controller
• 4 universal device types in 1: primary N, Tc, XY coordinate, RGBW, can be set by the buttons
• DALI DT8 device to control RGBW outputs or tunable white outputs via a single DALI address
• Only 1 address required to control 4 outputs separately under primary N mode
• 4 Channels constant voltage or constant current output
• Control of four PWM outputs via DALI device type 8
• Color control as defined in the DALI specification device type 8
• Color type primary N, Tc, XY coordinate, RGBW can be set by manual set buttons
• Supports DT8 device commands, compatible with DALI masters that support DT8 commands
• Configuration via DALI master USB interface
• Numeric digital display for setting DALI address manually
• Compatible with universal AC push switch
• Waterproof grade: IP20
Specifications:
| Input Voltage | 12 - 36V DC |
| Output Voltage | 12 - 36V DC |
| Output mode | Constant voltage |
| Output current | 4 x 5A |
| Output Power | 4 x (60 - 180)W |
| Output mode | Constant current |
| Output current | 4 x 350mA |
| Output Power | 4 x (4.2 - 12.6)W |
| Output current | 4 x 700mA |
| Output Power | 4 x (8.4 - 25.2)W |
| DALI Consumption | 2mA |
| Dimming Range | 0.1% - 100% |
| Size (L x W x H) | 170 x 53.4 x 28mm |
| Ambient Temperature | -20℃ ~ +50℃ |
Push Dimmer Mode
- Click the button to switch ON/OFF
- ŸPress and hold down the button to increase or decrease light intensity to desired level and release it, then repeat the operation to adjust light intensity to opposite direction. The dimming range is from 1% to 100%.
- Double click the button to switch between modes (brightness, RGB color mode,...)
- Press and hold down the button to change other parameter (RGB colors under RGB color mode,...)
