Set of Raspberry Pi 3A+, original case, power supply 5V / 2.5A Raspberry Pi
Products purchased together
Delivery terms
Pickup at LEMONA electronics store
Pickup at LEMONA electronics store For free
Quantity in shop
 Not available | Riga Store |
| Not available | Central Warehouse |
Home delivery
Home delivery
After handing the goods to the courier, we will inform you by e-mail.
Over €35.00 (Orders up to 1000 kgs) | For free |
To €35.00 (Orders up to 1000 kgs) | €3.99 |
Delivery to a DPD Pickup location
Delivery to a DPD Pickup location
€2.50
Product description
Description
Set includes minicomputer Raspberry Pi 3 model A+ 512 MB RAM along with the official case and power supply of 5 V with current of 2.5 A. The set includes a set of heatsinks fitted to chip located on the board.
What is new in Raspberry Pi 3 A+?
| Feature | Description |
| Processor BCM2837B0 | The chipset Broadcom BCM2837B0 with 64-bit Quad-core ARM-8 Cortex-A53 CPU running at 1.4 GHz, it provides more power than previous models of the Raspberry Pi |
| Wi-Fi Dual Band | New, integrated wi-fi Dual Band, 802.11 b/g/n/ac operates in the range of 2.4 GHz and 5 GHz. It delivers higher data transmission rate. |
| PoE Power Supply | Powering through a network of Ethernet with the optional pads pad type HAT will be available soon. |
| Shape and connectors | The distribution of elements and the outline of the board is compatible with Raspberry 1 A+. Board has one connector USB, HDMI, Jack, DSI and CSI connectors and 40 pins of GPIO. It does not have Ethernet connector. |
The picture and sound
Raspberry Pi has HDMI connector, version 1.4, through which you can send picture, and sound. In addition, the board was equipped with a 4-field Jack of 3.5 mm to connect headphones, speakers or display the video through a standard RCA Composite. The device supports H. 264 compression (1080p30) and graphics OpenGL ES 1.1 and 2.0.
Communication
Raspberry has the main communication interfaces which can be found in office computers of PC class. In addition to the previously listed connectors of audio and video, the user has at his or her disposal:
- one USB connector, to which you can connect, for example, a mouse, a keyboard, a wi-fi card or USB flash drive. If you find that the slots are too short, you can increase their number using an external USB HUB.
- the wi-fi module allows to connect to the wireless network of 2.4 GHz and 5 GHz, 802.11 b/g/n/ac - the latest system Raspbian / NOOBshas built-in drivers
- Bluetooth4.2provides data transfer through the popular interface
- GPIO- outputs/inputs with general purpose that can be used to control the LEDs, buttons, drivers of engines. Among them are the pins that support interfaces: I2C, SPI and UART.
Power
As a power source, the system uses the micro-USB connector. The manufacturer recommends that the voltage indicated on the plug had a value of 5 V and maximum current of the used adapter shall not be less than 2.5 A. In our assortment there are special power supplies.
Technical data
| Model | Raspberry Pi 3, model A+ |
| Edition | 11 - 2018. |
| Processor chipset | Broadcom BCM2837 64-bit |
| The core | Quad-Core ARM Cortex A53 |
| Operating systems | Linux Raspbian; Windows 10 IoT |
| Clock frequency | 1.4 GHz |
| Architecture | ARMv8-A |
| RAM | 512 MB LPDDR2 @ 900 MHz |
| Memory | microSD card |
| GPIO slot | Connector 40-pin (2x20 pin) pitch of 2.54 mm |
| Power | 5.0 V / 2.5 A via micro-USB; 5 V through GPIO |
| Board sizes | 65 x 56 x 8.5 mm |
| Interfaces |
|
| USB interface | 1x USB 2.0 - slot type A |
| Network interface | no |
| The Wi-Fi Interface | Dual Band (2.4 GHz and 5 GHz 802.11 b/g/n/ac) |
| Bluetooth | Low Energy, BLE 4.2 |
| Camera | the CSI slot |
| Touchscreen display | slot for DSI |
| Video | HDMI HD 1080px / 30 fps 1080p30 H. 264; OpenGLES 1.1, 2.0 |
| Communication | UART, SPI, I2C, GPIO |
Specifications
Supplier product description
The kit includes a Raspberry Pi in version 3 A+ together with power supply of 5 V / 2.5 A, official case red-white, and heatsinks.
