Система управления светодиодным освещением, передатчик сигнала Wi-Fi, Perfect RF, Sunricher
Эти продукты доступны в магазине LEMONA electronics, и вы можете получить их на следующий рабочий день.
 1 шт. | Магазин в Риге |
 Недоступно | Центральный склад |
Доставка на дом 1-2 р. д.
Получение в почтомате 1-2 р. д.
Сроки доставки
Подбирая магазины LEMONA electronics
Подбирая магазины LEMONA electronics Бесплатно
Количество в магазине
| 1 шт. | Магазин в Риге |
| Недоступно | Центральный склад |
Доставка на дом
Доставка на дом
После передачи товара курьеру мы сообщим вам об этом по электронной почте.
Более 35,00 € (Заказы до 1000 кг) | Бесплатно |
К 35,00 € (Заказы до 1000 кг) | 3,99 € |
Получение в почтомате
Получение в почтомате
2,50 €
Описание товара
Signal converter for Wi-Fi control of Sunricher Perfect-RF series signal receivers. There are two possible uses:
1. Connect the signal converter to your home Wi-Fi router. 2. In this way, it is sufficient to connect your smartphone or tablet to the same Wi-Fi router. (recommended)
2. Connect your smartphone to the signal converter itself. In this way, to control the lights, it is necessary to be connected to the signal converter via a Wi-Fi connection. By changing the parameters using the "easylighting" app on your smartphone, the signal converter sends a radio signal to the other Perfect-RF series receivers (works like a normal controller)
Controller mapping:
1. Download the "easylighting" app to your smart device (both iOS and Android)
2. After 15-30 sec. the controller will establish a Wi-Fi network.
3. Use your smartphone to connect to this network. Enter the password 0123456789
4. Activate the "easylighting app"
5. Select Settings -> Connect WiFi LED Controller to your home network
6. Specify which Router to connect the device to, specify the Router password.
7. After the controller connects to your home router, disconnect the phone from the Wi-Fi network created by the SR-2818WIN.
8. At the bottom of the Easylighting app, select "Room", place a tick on the room you want to control.
9. Click again on "Room". A colour wheel will appear.
10. Press the Learning key on the Perfect-RF receiver (short click) and within a few seconds rotate the colour wheel in the easylighting app.
11. When the light source connected to the Perfect-RF receiver flashes, it confirms the association of the device with the room of your choice. In the app you can change the functions of the virtual controller (depending on whether the Perfect-RF receiver is RGB / RGBW / single colour, etc.) and you can also change the icon of the room you have selected.
The description was translated using an automatic translator. If you notice any discrepancies, please notify us by email: [email protected].
