Digitālais temperatūras kontrolieris ar 1m NTC sensoru 230V STC-1000
Kopā iegādātās preces
Piegādes termiņi
Piegāde uz norādīto ar adresi ar kurjeru (1-4d.d., ja prece ir noliktavā)
Piegāde uz norādīto ar adresi ar kurjeru (1-4d.d., ja prece ir noliktavā)
Vairāk par 35,00 € (Pasūtījumi līdz 1000 kilogrami) | Bez maksas |
Līdz 35,00 € (Pasūtījumi līdz 1000 kilogrami) | 3,99 € |
Piegāde uz DPD Paku skapi (1-4d.d., ja prece ir noliktavā)
Piegāde uz DPD Paku skapi (1-4d.d., ja prece ir noliktavā)
2,50 €
Preces apraksts
This universal temperature controller is used in the operation of central heating pumps, circulation pumps, fans, fridges, pools, aquariums, greenhouses and many similar applications.
Switching between cooling and heating modes.
Main functions
- Heating - in this mode, the relay is turned on until the temperature rises to the set value
- Cooling - in this mode, the relay is turned on until the temperature drops to the set value
Temperature control by setting the set value and hysteresis value. Temperature calibration. Compressor delay.
Large and clear LCD display. Connection diagram on the housing.
Automatic alarm when the temperature is exceeded or when a sensor error occurs.
Technical parameters and specifications
Temperature measurement range: -50°C – 99°C
Measurement accuracy: ±1°C for the range (-50°C - 70°C)
Power supply: 220VAC ±10%, 50/60Hz
Sensor: NTC sensor (1 pc)
Load capacity of relay contacts: Cooling (10A/250VAC), Heating (10A/250VAC)
Maximum connection power of contacts: Cooling 2.5kW, Heating 2.5kW
Operating temperature: 0°C - 60°C
Permissible humidity: 20% - 85%
Measurement resolution: 0.1°C
Sensor error delay: 1 minute
Power consumption: <3W
Storage temperature: -30°C – 75°C
Front panel: 75 (length) x 34 (width) [mm]
Product dimensions: 75 (length) x 34 (width) x 85 (height) [mm]
Installation dimensions: 70 (length) x 27 (width) [mm]
Sensor cable length: ~1 meter (including the sensor)
