Joy-iT KY032 Infrared proximity sensor
Produkta nr.: SEN-KY032IR
Preces attēliem ir ilustratīva nozīme. Precīzas preces specifikācijas, lūdzam, skatīt aprakstā.
Piegādes termiņi
2026-01-20 Paredzamā piegāde, pasūtot tagad
Prece tiek pasūtīta no piegādātāja noliktavas. Ja piegādātājs šo preci nevarēs piegādāt līdz norādītajam datumam, informēsim Jūs e-pastā..
 Ir | Piegādātāju noliktava |
Piegāde uz norādīto adresi ar kurjeru
Piegāde uz norādīto adresi ar kurjeru
Pēc preču nodošanas kurjeram mēs Jūs informēsim e-pastā. Bezmaksas piegāde pasūtījumiem virs 50 EUR.
Vairāk par 50,00 € (Pasūtījumi līdz 1000 kilogrami) | Bez maksas |
Līdz 50,00 € (Pasūtījumi līdz 1000 kilogrami) | 3,99 € |
Piegāde uz DPD Paku skapi
Piegāde uz DPD Paku skapi
Pēc preču nodošanas kurjeram mēs Jūs informēsim e-pastā. Bezmaksas piegāde pasūtījumiem virs 50 EUR.
2,50
Preces apraksts
Joy-iT KY032 Infrared proximity sensor
Noderīga informācija
Specifikācijas
Piegādātāja prece apraksts
The KY032IR sensor is an infrared proximity sensor.
It detects an obstacle with the help of the transmitter (infrared light) and receiver (photodiode) by reflection of the surface.
The determined value 0/1 ( true/false ) is sent as a digital signal to the microcontroller.
With the help of the potentiometers the strength of the transmitter and the sensitivity of the receiver can be adjusted.
The distance for triggering the sensor can be adjusted by the settings made.
Additionally the sensor has a PIN "Enable" and a jumper "EN".
The jumper is plugged in as standard, which means that permanent obstacle detection is executed.
To deactivate permanent obstacle detection, the jumper must be removed and the PIN "Enable" for the control signal connected.
The sensor is suitable for controlling autonomous robots.
It detects an obstacle with the help of the transmitter (infrared light) and receiver (photodiode) by reflection of the surface.
The determined value 0/1 ( true/false ) is sent as a digital signal to the microcontroller.
With the help of the potentiometers the strength of the transmitter and the sensitivity of the receiver can be adjusted.
The distance for triggering the sensor can be adjusted by the settings made.
Additionally the sensor has a PIN "Enable" and a jumper "EN".
The jumper is plugged in as standard, which means that permanent obstacle detection is executed.
To deactivate permanent obstacle detection, the jumper must be removed and the PIN "Enable" for the control signal connected.
The sensor is suitable for controlling autonomous robots.
Technical data:
Model: Obstacle sensor
Function: detects obstacles by means of infrared (0/1 signal output when exceeding the limited value)
Detection distance: 2 - 20 cm
Special feature: Can be switched on and off via a controller using a separate pin (Enable-Pin)
Supply voltage: 3 - 5 V
Current consumption: at 3 V: approx.10 mA at 5 V. approx. 6 mA
Detection angle: 35 °
Operating temperature: -10 - 50 °C
Noderīga informācija
Piegādātāja preces parametri
Product code
SEN-KY032IR
Brand
Joy-iT
Supplier's product code
SEN-KY032IR
Product ID
U-2315012
Informācija, ko sniedz piegādātājs var atšķirties no paša produkta. Ja pamanījāt nesakritības lūdzam ziņot mums rakstot uz [email protected].