Joy-iT SPI to Ethernet interface converter
Piegādes termiņi
Prece tiek pasūtīta no piegādātāja noliktavas. Ja piegādātājs šo preci nevarēs piegādāt līdz norādītajam datumam, informēsim Jūs e-pastā..
 Ir | Piegādātāju noliktava |
Piegāde uz norādīto ar adresi ar kurjeru
Piegāde uz norādīto ar adresi ar kurjeru
Vairāk par 35,00 € (Pasūtījumi līdz 1000 kilogrami) | Bez maksas |
Līdz 35,00 € (Pasūtījumi līdz 1000 kilogrami) | 3,99 € |
Piegāde uz DPD Paku skapi
Piegāde uz DPD Paku skapi
2,50 €
Piegādātāja prece apraksts
The integrated W5500 chip enables simple control via the SPI interface. Due to its great popularity, both in the maker and industrial sectors, there are already a large number of application examples and libraries to be found online.
To process the Ethernet packets, the chip has an integrated 32 kB memory buffer.
In addition, the module is highly integrable due to its design and size.
Technical data:
Model: RJ45 Connector module with W5500 chip and status LED
Special feature: integrated full TCP/IP protocol, Wake Up after power failure
Compatible with: Arduino, Raspberry Pi, etc.
Flash storage: 32KB TX RX cache buffer
Voltage supply: 3.3 V
Working current: min. 200 mA
Logic level: 3.3 V (5 V tolerant)
SPI clock frequency: up to 80 MHz
Transmission rate: 10/100 MBps
Ethernet standard: 10 BaseT /100BaseTX
Supported TCP/IP protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
Operating temperature: -25 to 70 °C
