Linear smoke detector FireBeam Blue (7-70 m, Bluetooth)

Name: Linear smoke detector FireBeam Blue (7-70 m, Bluetooth)
SKU: U-3953316
Price: 420.89 EUR
Availability: InStock

Produkta nr.: PSFBBLUE

Vairāk līdzīgu produktu

Meklē "Linear smoke"

Piegādes termiņi

2024-06-17 Paredzamā piegāde, pasūtot tagad

Prece tiek pasūtīta no piegādātāja noliktavas. Ja piegādātājs šo preci nevarēs piegādāt līdz norādītajam datumam, informēsim Jūs e-pastā..

Ir	Piegādātāju noliktava

Piegāde uz norādīto ar adresi ar kurjeru

Vairāk par 35,00 €

(Pasūtījumi līdz 1000 kilogrami)

Bez maksas

Līdz 35,00 €

(Pasūtījumi līdz 1000 kilogrami)

3,99 €

Piegāde uz DPD Paku skapi

Pēc preču nodošanas kurjeram mēs Jūs informēsim e-pastā. Bezmaksas piegāde pasūtījumiem virs 35 EUR.

2,50 €

Preces apraksts

Linear smoke detector FireBeam Blue (7-70 m, Bluetooth)

Specifikācijas

Artikuls

U-3953316

NomNr

PSFBBLUE

Piegādātāja prece apraksts

Controlled and configured via Bluetooth with a smartphone
IP65 moisture-resistant housing
Power supply voltage: 10.2 V - 30 V
Operation range: 7-70 m. (expandable to 160 m.)

Automatic adjustment mechanism

General
Supply Voltage12 to 30 Vdc normal
Supply Current5.5mA in all operational states
Supply Current13.5mA in fast commissioning
Temperature-10°C to +55°C
Humidity10 to 95% RH Non-condensing
Protection IndexIP65 when suitably mounted and terminated
Optical Wavelength870nm
Maximum Angular Alignment±5°
Maximum Angular Misalignment(static not auto-aligning)
Alarm Sensitivity Levels25% (1.25dB) to 50% (3dB) in 1% (0.05dB) increments (default 35% (1.87dB))
Alarm ConditionObscuration drops to below pre-defined sensitivity level. Time to Alarm Condition adjustable between 2 to 30 seconds in 1 second increments (default 10 seconds)
Alarm IndicationApp Status - FIRE, Head Red Flashing LED, Alarm Relay Change Over (CO) Contact, Rating 2A @ 30 VDC
Test / Reset FeaturesBeam test function with App, Alarm latching / auto-reset selectable (default auto-reset), Alarm reset in latching mode with App reset function, removing power for >5 seconds or momentarily apply >5 VDC to reset connections in Beam Head
Fault Sensitivity Level<4%
Fault ConditionObscuration drops to below the fault sensitivity level within 1 second, Power Down or Supply Voltage < 9 VDC, Commissioning modes, Pre-Alignment and Auto-Alignment, Beam turned off during Beam Maintenance, Time to Fault Condition adjustable, 2 to 60 seconds in 1 second increments (default 10 seconds)
Fault IndicationApp Status - FAULT, Head Yellow Flashing LED 1 Second, Fault Relay Change Over (CO) Contact Rating 2A @ 30 VDC
Normal ConditionObscuration level is above the Alarm sensitivity level, App Status - NORMAL, Programmable on/off, Head Green Flashing LED, Programmable on/off
Auto-Align / Beam Contamination CompensationAuto-align during normal operation if obscuration drops below 90% for the duration of the align time set (doesn't affect normal operating mode), Beam Contamination Compensation 4 hour monitoring. Compensation data available in the App