Piegādes termiņi
2026-09-02 Paredzamā piegāde, pasūtot tagad
Prece tiek pasūtīta no piegādātāja noliktavas. Ja piegādātājs šo preci nevarēs piegādāt līdz norādītajam datumam, informēsim Jūs e-pastā..
 Ir | Piegādātāju noliktava |
Jaunums! Saņemiet preces veikala pasta nodaļā – Krasta 105, Rīga
Jaunums! Saņemiet preces veikala pasta nodaļā – Krasta 105, Rīga Bezmaksas
Lūdzu, saņemiet savu preču sūtījumu, kad saņemsiet SMS.
Piegāde uz norādīto adresi ar kurjeru
Piegāde uz norādīto adresi ar kurjeru
Pēc preču nodošanas kurjeram mēs Jūs informēsim e-pastā. Bezmaksas piegāde pasūtījumiem virs 50 EUR.
Vairāk par 50,00 € (Pasūtījumi līdz 1000 kilogrami) | Bez maksas |
Līdz 50,00 € (Pasūtījumi līdz 1000 kilogrami) | 3,99 € |
Piegāde uz DPD Paku skapi
Piegāde uz DPD Paku skapi
Pēc preču nodošanas kurjeram mēs Jūs informēsim e-pastā. Bezmaksas piegāde pasūtījumiem virs 50 EUR.
2,50 €
Preces apraksts
Multifunction Sensor Bisly UMS 5.3 (White, 24V DC, IP30)
Specifikācijas
Artikuls
U-5491777
NomNr
APUMSWHITE
Piegādātāja prece apraksts
- Type: Multifunction sensor
- Brand: Bisly
- Model: UMS 5.3
- Color: White
- Power supply: 24 V DC
- Protection class: IP30
- Communication protocol: RS-485
- Sensors: Temperature, humidity, CO₂, VOC, motion (PIR), light
- Designed for advanced building automation systems
- General
- ProductUMS Supersensor – Universal Comfort Sensor for Smart Buildings
- Part number1201153 (White), 1202153 (Black)
- ApplicationMultifunction indoor sensor for advanced building automation systems, combining air quality, climate, lighting and occupancy detection
- Supply voltage24 V DC ±25%, reverse polarity protection
- Power consumptionMax. 1.5 W at 24 V when all sensors are active, internal overcurrent protection approximately 1.1 A
- Power outputSoftware-controlled high-side power switch, rated current 0.35 A, reverse polarity protection, short-circuit protection, overcurrent protection, Port: +24 V OUT
- Air temperature sensorAccuracy: ±0.5 °C (max.), Range: -10 to 85 °C
- Relative humidity sensorAccuracy: ±4% RH (max.), Range: 0–80% RH
- CO₂ measurement range0–2000 ppm, Accuracy: ±150 ppm ±0.5% of reading
- Motion detectionPIR sensor, human detection radius 4 m under typical conditions, ΔT ≥ 5 °C, speed 1 m/s, mounting height 2.8 m
- Light intensity sensor0.1–30000 lux, Accuracy ±20%
- Color temperature sensor2000–5000 K, Accuracy ±500 K
- VOC sensoreTVOC sensor, Range: 0–30000 ppb
- LED controlRGB LEDs with software-controlled color and brightness, configurable to display CO₂, VOC, temperature, humidity, motion and other parameters
- Digital inputs2 digital inputs, supports +24 V DC, internal 2 kΩ pull-up resistor to +5 V DC, active low ≤ 2 V, Ports: IN1–IN2
- PWM outputs3 × PWM outputs, default frequency 100 Hz, operating range 0–12 V, Ports: PWM1–PWM3
- Firmware updateOver-the-air (OTA) update capability
- Communication interfaceRS-485 (proprietary Bisly protocol) interface for Bisly UM8 Pro controller
- Operating temperature+5 to +40 °C
- Operating humidityMax. 80% RH, non-condensing
- Mounting typeScrew mounting
- Color and finishWhite or black, matte
- Enclosure flammabilityUL94 V0 flame-retardant
- Weight125 g
- Dimensions98 × 110 × 40 mm
- Environmental protection ratingIP30
- CertificationsCE, RoHS, WEEE
- Directive complianceLVD, EMC, RoHS, WEEE
- FeaturesAir quality monitoring, climate sensing, occupancy detection, lighting measurement, encrypted RS-485 communication, legacy system integration support, security-compliant relay output, energy-efficient building control
Piegādātāja preces parametri
Product code
APUMSWHITE
Category
Building Automation
Supplier's product code
APUMSWHITE
Product ID
U-5491777
Informācija, ko sniedz piegādātājs var atšķirties no paša produkta. Ja pamanījāt nesakritības lūdzam ziņot mums rakstot uz [email protected].