Remote control set GSN ACS-146R 4-ch

• The wireless four-channel multifunctional receiver ACS-146R, operating in conjunction with two hand-held push-button transmitters, provides the remote control of any electronic equipment: 
• Electrical gates
• Sliding doors
• Electromagnetic locks
• Automatic barriers
• Electrical curtains
• Lighting fixtures, etc.
• Can work with 12V

ACS-146R FEATURES

• FOUR INDEPENDENT CHANNEL
• FIVE OPERATING MODES OF EACH RECEIVER CHANNEL:
           

1. PULSE MODE - 1SECOND

2. SWITCH ON PERIOD MODE (1 – 300 sec.)

3. SWITCHING MODE (ON/OFF)

4. HOLD MODE (CONTINUOUS)

5. PANIC BUTTON MODE (SECURITY)

Power input: AC/DC 24V

Receiving range in open space - up to 500 meters

KEELOQ^_® code hopping technology

Maximum quantity of remote controls learning the receiver – 330

Programming the ON/OFF period for the desired time from 1 to 300 sec

Unauthorized access protection (in “Panic Button” mode)

Last event memory: 30min (in “Panic Button” mode)

The alarm comes on when the electric power supply is disconnected 
(in “Panic Button” mode)         

 KEELOQ^® CODE HOPPING TECHNOLOGY

 The multifunctional remote control sets use KEELOQ^® code hopping technology, ensuring the highest level of security by code combination programmable but read-protected. The combinations of different codes transmitted by remote controls prevent radio scaning and unauthorized access.  

RECEIVING RANGE

The operating range of the hand-held remote controls depends on the mounting location of the receiver.

The various obstructions, the environmental factors, the radio-frequency and electromagnetic sources might influence the emission of radio-signal and as a result, might shorten the receiving range. For optimal radio-signal reception: mount the receiver at least 1.5 meter above the ground, as far as possible from any radio frequency and electromagnetic sources.

SPECIFICATIONS