Sveķi 3D printerim AMD-3 1L pelēks AMERALABS

Ameralabs have created AMD-3 material for modelling artists with one purpose in mind: to bring to life even the slightest expressions of your characters and miniatures. Finest features like hair and wrinkles are captured when printing with this 3D resin and allows you to materialize it just as you have envisioned it.

Printing speed

AMD-3 is probably the FASTEST curing resin for LCD printers!

Designed to work even on low powered LED/LCD 3D printers equipped with LED light sources emitting 365-420nm UV light. Compatible with color and monochrome LCD 3D printers.

Accurancy

AMD-3 LED resin produces dimensionally accurate and stable prints. Due to its stiffness and a fair amount of hardness it can sustain straight edges and print out even the tiniest features. Supports do not bend during printing, keeping the model in place throughout the whole printing session and giving a higher rate of success with complex prints. It exhibits low shrinkage so the print will not deform during post-curing stage and will not crack over a long period of time.

Surface

Resin is available in two colors: black and grey. Carefully pigmented to get ideal color that expresses the most intricate details. Colour is almost fully opaque. Surface is glossy and hard (80-90 Shore D). After post-cure, print does not feel sticky or tacky and is pleasant to touch. It does not scratch very easily. It can be primed and painted with most popular paints. Due to its hardness, material’s surface can be polished to remove any layer lines, support marks or other imperfections. This allows using this material for printing masters for applications where smooth surface is needed.

Resistance

Water absorption is less than 0.2%. This means, that your models will not deform due to moisture or exposure to IPA. It is even resistant to some acids.

Mechanical properties

1. Tensile Strength at Break: 55MPa (ISO-527, post-cured) 
2. Elongation at Break: 6% (ISO-527, post-cured) 
3. Viscosity: 180-200 cPs (at 25°C) 
4. Hardness: 80-90 Shore D (ISO 868) 
5. Shrinkage: less than 1%
6. Compatible UV Wavelength: 365 – 420 nm