Piegādes termiņi
Piegāde uz norādīto ar adresi ar kurjeru (1-4d.d., ja prece ir noliktavā)
Vairāk par 35,00 € (Pasūtījumi līdz 1000 kilogrami) | Bez maksas |
Līdz 35,00 € (Pasūtījumi līdz 1000 kilogrami) | 3,99 € |
Piegāde uz DPD Paku skapi (1-4d.d., ja prece ir noliktavā)
2,50 €
Preces apraksts
Temperature and humidity controller included with a sensor. It has two clear displays: a red one for temperature and a blue one for humidity, as well as rubber buttons for changing the configuration. There is a diode above each display that lights up when the temperature/humidity regulating device is activated. Depending on the entered settings, the controller can operate simultaneously in the heating/cooling and humidification/dehumidification modes. The device is very easy to configure, it can handle connected devices (e.g. fans, heaters, humidifiers, sprinklers, boilers) with a power not exceeding 2500W and a maximum current consumption of 10A for each channel. The module has settings memory, power failure does not reset the entered values. The set includes an integrated temperature and humidity sensor on a 1m long cable.
It is suitable for controlling temperature and humidity in: warehouses, terrariums, cold stores, production halls, greenhouses, drying rooms and etc.
TECHNICAL DATA
Supply voltage: 230V AC
Number of channels: 2 (1 for temperature control, 2 for humidity control)
Maximum power of controlled devices: 2500W for each channel
Maximum current consumption for each channel: 10A
Temperature measurement range: -20°C to 80°C
Humidity measurement range: 0 to 100% RH
Humidity and temperature measurement resolution: 0.1
Temperature measurement accuracy: +/- 1°C
Humidity measurement accuracy: +/- 0.1%
Dimensions: 75 x 85 x 29 mm